ATCOM AT800 Series User Manual download pdf (Page 23)

AT800 Series User Manual

ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn

1. Connect Type: DHCP, Static

2. Current IP: IP address

3. Hostname: Hostname

4. Domain: The domain name

5. Current Netmask: The current netmask

6. Current Gateway: The gateway address

7. Enable Web Server: Access by web interface. Default is set to yes. If disabled, user will not

able to access webpage.

8. Non-DHCP IP Address: Static IP address

9. Non-DHCP Subnet Mask: Static netmask address

10. Non-DHCP default route: Static gateway address

11. Non-DHCP DNS1/DNS2: Primary DNS and Secondary DNS working in static IP.

12. Enable VLAN: Enable/disable VLAN

Web Interface

Please check the IP address of the unit in menu settings, refer to LAN port . Access WEB interface by

following steps:

 Enter the IP address (e.g. http://192.168.1.100) in the browser

 It enters user webpage by default, and user can click admin button on the right corner to

switch to admin login.

There are two web login levels: admin/user. They have no password by default, however, you can set

passwords in Network-->Advance webpage. In user login level, VLAN, Port link, Qos, syslog, SIP

settings, Ring, Manual update, Auto provision and Reset are not able to be changed.

System status

The system status display basic information about the system:

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

No comments

ATCOM AT800 Series User Manual Page 23