ATCOM AX-400P Installation Guide Page 1

www.atcom.cn Tour of Trixbox Edwin Version Date Author Description 1.0 2007-June-08 Edwin Creation 1/32

www.atcom.cn 3. Make outbound call To make an outbound call, we need to add trunk first. There are many types of trunk, SIP trunk, Zap Trunk and

www.atcom.cn machine. FXS interfaces get phones plugged into them, delivery battery, and provide ringing. FXS interfaces are signalled with FXO sig

www.atcom.cn Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXO Kewlstart (Default) (Slaves: 04) Channel 05: FXO Kewlstart (Default)

www.atcom.cn Add Zap Trunk Use the SSH tool to open the file /etc/asterisk/zapata-auto.conf You will see there are five channels here. Just like:

www.atcom.cn Maximum Channels: Maximum available simultaneous outbound calls. Outbound Dial Prefix: 9 Trixbox will add a prefix to the number you

www.atcom.cn Add outbound routes Ok. We have added the trunk already. To make out bound calls, we also need to specify that which trunk that our c

www.atcom.cn Add zap extensions Remember that we have two FXS modules on the AX-400p card, we can use this two fxs port to build two zap extension.

www.atcom.cn And we have assigned voice mail boxes to each extension. To expand the number of extensions, you can just add IP phone or softphone.

www.atcom.cn 4. IVR IVR, means Interactive Voice Response. It is very important for the enterprise application. We can use the IVR to do the auto

www.atcom.cn Specify the name of this record and dial *77 in 2001 extension and you will here indicate sound and then record your voice. When han

www.atcom.cn 1. Introduce...4 Relate

www.atcom.cn Add incoming route to IVR entry Go to FreePBX --> SetUp --> Inbound Routes--> Add Inbound Route Zaptel Channel : 1 R

www.atcom.cn 5. Make outbound calls via SIP Service We have added zap trunk in the before chapter. But the rate for international call on the PST

www.atcom.cn Link outbound route to SIP trunk Go to FreePBX --> SetUp-->Outbound Routes-->Add ourbound routes Route name: 8_internati

www.atcom.cn 6. Remote register through IAX2 protocol We have built a local simple IP PBX system so far. This is the total structure of my system:

www.atcom.cn Add IAX2 extension Go to -->Free PBX --> setup-->Extensions -->add generic IAX2 device. and add a IAX2 extensions: Add IA

www.atcom.cn I can see that my public ip is 124.35.127.209. so I can use my ATA AG-188 to register to my Trixbox server via internet. The confi

www.atcom.cn OK, Now!, we can use the AG-188 to register our Trixbox server now, but it is very annoy because our public IP is dynamic and will cha

www.atcom.cn 7. Echo Cancellation Echo is a big problem in VoIP and the most possibility echo problem in our system is the making outbound calls

www.atcom.cn Install the MG2 echo cancellation If the echo is still worst or you hear some noise at the beginning of your speech, then we can try t

www.atcom.cn 8. Install AX-4S in the Trixbox AX-4S is a four ports BRI card. It doesn’t use the zaptel driver so the genzapconf command doesn’t w

www.atcom.cn 3/32

www.atcom.cn ; define your ports, e.g. 1,2 (depends on mISDN-driver loading order) ports=1,2,3,4 context = from-pstn ; context where to go to when

www.atcom.cn After doing that, all calls to the BRI port will route to the IVR entry. Auto load the AX-4S card after system startup Open the /etc/r

www.atcom.cn 9. The End Thanks for your reading of this article. If you have question or advise of this article, please feel free to contact me

www.atcom.cn 1. Introduce This article is a guide to use Trixbox and ATCOM products to build a simple application on small office application. Th

www.atcom.cn System set up We use following devices in our set up: 1: Server with Trixbox installed: we also install AX-100p and AX-400p in t

www.atcom.cn 2. Install Trixbox and make internal calls Install Trixbox The set up of Trixbox is simple. Just download the ISO file from www.trixb

www.atcom.cn Add SIP extensions: Sip extensions is an SIP account allows you to log on the Trixbox via an SIP terminal such as IP phone AT-530 and

www.atcom.cn Secret: 2005 ; Log on password Enable Voicemail Voicemail password: 2005 ; password of your mailbox So we have created

www.atcom.cn Register Server Addr: 192.168.1.129 IP address of Trixbox server. Register Username: 2004 Register Password: 2004 Phone Numbe