ATCOM AX-400P Installation Guide download pdf (Page 15)

www.atcom.cn

Add outbound routes

Ok. We have added the trunk already. To make out bound calls, we also need to

specify that which trunk that our calls should route to.

Go to the Freepbx --> Setup--> Outbound Routes--> Add Route

Route Name: 9_outside

Dial Patterns: 9|. Trixbox will cut the first number “9” if the phone

number dial begins with 9.

Trunk Sequence: ZAP/g0 all number accord with the above Dial Patterns

will be sent to ZAP/g0 trunk.

This outbound route means, if we dial any phone number start with 9, for example

983018806, then Trixbox will cut the number first number “9” and send the

number(83018806) to the g0 group (it will use the available channel of channel 1,2,3).

After doing above, you can use SIP extensions to make outbound calls.

15/32

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

ATCOM AX-400P Installation Guide Page 15