ATCOM AX-400P Installation Guide download pdf (Page 10)

www.atcom.cn

3. Make outbound call

To make an outbound call, we need to add trunk first. There are many types of trunk,

SIP trunk, Zap Trunk and so on, We use AX-100p and A-400p to make zap trunks

here.

Install AX-100p and AX-400p to the PC (Hardware)

1. Power off Trixbox and pull out the power adapter.

2. Insert AX-100p card to the PCI slot of your PC and firm it with screw.

3. Insert AX-400p card to the PCI slot, please see below picture for the configure

port1

port3

port4

port2

Module

One

Module

Two

Module

Four

Module

Three

Power

Set up:

Insert AX-110X F

module 2, port 1 and port 2 will then be

configured as FXO

Insert AX-110S FX

module 4, port 3 and port 4 will then be

configured as FXS

If you have inse

AX-400p, because

signal to the norm

XO module to module 1 and

port.

S module to module 3 and

port.

rt AX-110S module to the

the FXS port need to provide

al phone, you also need to

power the AX-400p with your PC via the power port. Otherwise AX-400p won’t have

sufficient voltage to drive the normal phone connected.

AU-110S(FXS) AU-110X(FXO)

What are FXO and FXS?

FXS (Foreign eXchange Station) is an interface which drives a telephone or FAX

10/32

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Comments to this Manuals

No comments

ATCOM AX-400P Installation Guide Page 10

Comments to this Manuals