ATCOM IPPBX IP02 User Manual download pdf (Page 15)

IPPBX IP02 User Manual

~ 13 ~ ATCOM TECHNOLOGY CO., LIMITED

Authentication for SIP phone to register and make calls.

2) SIP Setting

NAT

Try this setting when IPPBX is on a public IP, communicating with devices hidden behind a NAT device

(broadband router). If you have one-way audio problems, you usually have problems with your NAT configuration

or your firewall’s support of SIP+RTP ports.

Can Reinvite

By default, IPPBX will route the media streams from SIP endpoints through itself. Enabling this option causes

IPPBX to attempt to negotiate the endpoints to route the media stream directly, bypassing IPPBX. It is not always

possible for IPPBX to negotiate endpoint-to-endpoint media routing.

DTMF Mode

Select DTMF sending mode, there are three modes: rfc2833, inband, info. The DTMF setting in here should be

as same as that in SIP phone, otherwise IPPBX will not detect the users’ input correctly during a call.

Auto means IPPBX will match anyone of them according to the setting of SIP phone.

Transport

The transplant protocol type for VoIP data package, default is UDP. Please make sure TCP is enabled in PBX

Settings -> SIP Settings before using TCP.

SIP Quality

Check this option to force keep alive.

3) Voice Mail

Enable Voice Mail

Check this option to enable voice mail account for the extension. Enabled by default.

Voice Mail Access PIN Code

Password for accessing this voice mail account, default is the extension number. It’s also the password for

extension to login his administration web page.

4) Mail Setting

Enable Sending Voice Mail

Check this option to enable PBX send new voicemail to Email address below as an attachment.

Email Address

The Email address that new voicemail will be send to when Enable Sending Voice Mail is enabled and PBX

settings -> SMTP settings is right set.

5) Follow Me

Follow me is a feature to let an incoming call to a called party to be redirected to a third party, the third party can

be a voicemail box, ring group, mobile telephone and so on.

When callee is No Answer / Busy / Unreachable, incoming calls will go to voicemail by default, if voicemail is

disabled, call will be hung up.

6) Other Options

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 68 69

No comments

ATCOM IPPBX IP02 User Manual Page 15