ATCOM AT800 Series User Manual download pdf (Page 9)

AutoTune™ User Guide

3. Motorola APX™ Portable Radio Test Setup

In order to perform the test and alignment procedures, the APX™ Portable radio must

be connected to the R8000 Communications Systems Analyzer as shown in the figure

below.

Make certain that the radio under test is configured as described in the

corresponding diagram before attempting to perform an alignment or test.

Failure to do so may result in poor radio performance and/or damage to the

analyzer or radio equipment under test.

3.1. APX™ Test Setup

Refer to the diagram below for the proper test setup. Note that the correct setting for

each RLN4460 test set control is highlighted in yellow.

Figure 3-1. APX™ Portable Test Setup Diagram

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 43 44

No comments

ATCOM AT800 Series User Manual Page 9