ATCOM IPPBX IP02 User Manual download pdf (Page 31)

IPPBX IP02 User Manual

~ 29 ~ ATCOM TECHNOLOGY CO., LIMITED

5. Create Service Provider to connect two IP PBXes

Service Provider is used to interconnect two IP PBXes, it must be created in both IP PBXes, after setting service

provider and outbound route, extensions of each IP PBX can call the other’s directly according to the outbound

route.

5.1 Create Service Provider

Go to PBX Settings -> Trunks, Click to add a new service provider.

Type

SIP

Provider Hostname/IP

Hostname or IP of your VoIP provider, default port is 5060.

Provider Name

A unique label to help you identify the service provider.

Call Recording

Check this option to record all calls made by this trunk. User can check the recordings with record

account(password is the same with admin) .

Maximum Outbound Calls

Define the maximum quantity of outbound connections (simultaneous calls) that can be used on this trunk.

Inbound calls are not counted in. 0 means no connection limit.

Transport

The transplant protocol type for VoIP data package, default is UDP. Please make sure TCP is enabled in PBX

Settings -> SIP Settings before using TCP.

Preferred Code

Set the allowed codec and priority for this trunk.

Advance Configuration

DOD(Direct Outward Dialing Number) Setting

Set the Outbound number for different extensions. Detailed example can be found in Chapter 4.1.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 68 69

No comments

ATCOM IPPBX IP02 User Manual Page 31