ATCOM IPPBX IP02 User Manual download pdf (Page 7)

IPPBX IP02 User Manual

~ 5 ~ ATCOM TECHNOLOGY CO., LIMITED

NOTE: It’s recommended to re-set IP address of IPPBX via WAN at the first time, Since DHCP server on LAN

port is enabled by default, Other DHCP client enabled devices in the network may obtain IP from IPPBX rather

than real DHCP server. And then access IPPBX via LAN after configuring LAN settings.

1) Connect IPPBX to your PC directly or through switch.

Make sure IP address of your PC is in network 192.168.1.0/255.255.255.0, if not, you need to appoint an IP

address for your PC, for example, 192.168.1.3

2) Login IPPBX as administrator via WEB GUI

User: admin

Password: atcom

NOTE: Language option will be accomplished in future versions, currently, only English is supported. So it’s not

selectable now.

3) Go to Network Settings ->WAN.

Re-set IP of WAN port.

4) Go to Network Settings -> LAN.

Re-set IP of LAN port.

2.2 WAN Settings

There are three ways to set an IP address to WAN port: DHCP, Static IP, PPPoE.

DHCP

IPPBX will obtain an IP address automatically from DHCP server when rebooting. It’s not recommended to

choose this option unless there is a reserved IP for IPPBX in DHCP server so that IPPBX can keep the same IP

all the time.

1 2 3 4 5 6 7 8 9 10 11 12 ... 68 69

No comments

ATCOM IPPBX IP02 User Manual Page 7